Autómatas programables
Otros modelos
ROTARY STEPPING RELAY MVR
Application
Each electric impulse is sent to a solenoid, provoking ratchet engagement in a ratchet system, to turn it to a certain degree: a complete step is realized.
Contact, cam, switch and others auxiliaries components are driven by the ratchet system, that can realize a serial of predetermined operation.
This rotary stepping relay switches 2 circuits, but it doesn’t disconnect circuits. To obtain a contact rating , use an auxiliary contact, mounting on the solenoid, which disconnect the common dot and then switch .
Generale features:
- function: step up – step down
- presentation: without cover
- fixing: 3 fixing points tapped (8.32 NC 2 B) or M4
- connection: solder or push on 2.8 mm
- mounting position: deck in vertical plane
- mechanic life: 5.000.000 of steps
- weight: 290g
Conception
dimension and mounting:
Composants
Electric features:
- operation voltage (rV): 24, 48, 60, 125 et 220 V AC or DC
- operating range: -15/+10% of rV
- coil consumption: 15 W / 25 VA
- stepping speed: 35 ms
- coil rating stepping: intermittent 5 min max at 10% cycle
- coil rating reset: intermittent 10 min max at 80% cycle
Contact features:
- Number of positions on deck: 24
- Number of active positions: 24
- with covering contact mounting on the solenoid
- number of decks: 1 or 2
- number of wipers: 1 to 4
- contact rating: 1.5A (115VAC resistive)
- auxiliary contact rating: 5A (115VAC resistive)
- steep of rotation: 20 steps per seconde
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis