Bienvenido
Productos
Autómatas programables
Applications for building and civil engineering
PLC for civil engineering equipment
Autómatas programables
Otros modelos
Imprimir
* 24 V battery
Inputs :
* keyboard / 8 commands / 24 digital / 3 frequency
* 2 analog inputs / incremental coders
* Option for other analog inputs.
Outputs :
* 96 relays outputs modulo 16
* 1 static output 1 A / 24 V, motor regulation
* 1 static output 0/10 V , pump regulation
Communication :
* 1 CAN bus between console and back card
* 1 RS 232 link for both devices for data loading
* 1 RS 232C link with an external printer
Dimension :
* Console : 240 x 300 x 50 mm
* Back card : 250 x 350 mm
PLC for civil engineering equipment
Application
Objet : Management of automatic mixture and spreading of tar on the road. Regulation of the vehicle\'s speed and the pump\'s speed. Regulation of the height and width of the spreading ramp. Collection of information (temperature, weight, etc...). Keyboard and back card applications are programmed through ISAGRAF software.
Presentation :
. 1 on-board operator console with keyboard, graphic display, jets\' statement and control visualisation.
. 1 card located in a cabinet at the back of the vehicle and receiving interfaces of inputs, outputs, communication, as well as a CPU. the communication between these two devices is ensured by a CAN bus.
. Output on printer with horodating of the characteristics (work, road surface, weight, spreading duration, temperature, etc...)
Presentation :
. 1 on-board operator console with keyboard, graphic display, jets\' statement and control visualisation.
. 1 card located in a cabinet at the back of the vehicle and receiving interfaces of inputs, outputs, communication, as well as a CPU. the communication between these two devices is ensured by a CAN bus.
. Output on printer with horodating of the characteristics (work, road surface, weight, spreading duration, temperature, etc...)
Conception
Power supply :* 24 V battery
Inputs :
* keyboard / 8 commands / 24 digital / 3 frequency
* 2 analog inputs / incremental coders
* Option for other analog inputs.
Outputs :
* 96 relays outputs modulo 16
* 1 static output 1 A / 24 V, motor regulation
* 1 static output 0/10 V , pump regulation
Communication :
* 1 CAN bus between console and back card
* 1 RS 232 link for both devices for data loading
* 1 RS 232C link with an external printer
Dimension :
* Console : 240 x 300 x 50 mm
* Back card : 250 x 350 mm
Composants
(console and back card)
* Microprocessor 16 bits AMD AM186ES
* "FLASH" PLC memory
* HCMOS logic
* Microprocessor 16 bits AMD AM186ES
* "FLASH" PLC memory
* HCMOS logic
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis
TEC Automatismes © 2024, Tous droits réservés