Relais instantanés et de Fonction
Imprimir
* resistive load 0,5 A - 48 V : > 10.000.000 operations
* resistive load 0,5 A - 125 V : > 5.000.000 operations
* inductive load L/R 40 ms - 3A x 24 V or 1 A x 48 V or 4 A x 125 V : > 300.000 operations.
Contacts rating in AC :
* resistive load I = 6 A - 220 V : 500.000 operations
* inductive load I = 4A - cos phi 0,5 - 220 V > 500.000 operations.
CS
Description
Instantaneous industrial relay conformint to CEI international standards.
CS relay is equipped in its standard version of : a locking system with elastic clips located on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities, a removable label-holder on front face and a mechanical indicator.
Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 et SRC.
CS relay is equipped in its standard version of : a locking system with elastic clips located on the basis and clasps on the cover, two hexagonal withdrawal clasps permitting up to 36 possibilities, a removable label-holder on front face and a mechanical indicator.
Pluggable on the following sockets : SVB, SPVB, SVDL, SPVDL, SRDL 4,8 et SRC.
Encombrement
Raccordement
Principe de fonctionnement
Contacts rating in DC :* resistive load 0,5 A - 48 V : > 10.000.000 operations
* resistive load 0,5 A - 125 V : > 5.000.000 operations
* inductive load L/R 40 ms - 3A x 24 V or 1 A x 48 V or 4 A x 125 V : > 300.000 operations.
Contacts rating in AC :
* resistive load I = 6 A - 220 V : 500.000 operations
* inductive load I = 4A - cos phi 0,5 - 220 V > 500.000 operations.
Caractéristiques
| Fonction | Instantaneous |
| Présentation | under cover |
| Raccordement | on front or rear wiring socket |
| Nombre de manoeuvres mécaniques | 20.000.000 |
| Température de fonctionnement | - 10 to + 55°C |
| Température de stockage | - 40 to + 85°C |
| Catégorie climatique | optional reinforced climatic protection |
| Tension de choc | 5 KV (wave 1,2/50 µs) |
| Rigidité diélectrique | 2500 V eff 50 Hz |
| Résistance d'isolement | C250 V (acording to NFC 45-202 & VDE 0110) |
| Masa | 100 g. |
| Degré de protection | IP 40 (according to NFC 20-010) |
| Tenue aux chocs mécaniques | severity 50 A (NFC 20-610 & CEI 682-25/Test Ea) |
| Tenue aux vibrations | frequency range 10-55 Hz, 0,35 mm crest |
Bobine
| Courant continu | Courant alternatif | ||
| Tension nominale mini. | 12 V | 24 V | |
| Tension nominale maxi. | 220 V | 380 V - 50 Hz. | |
| Domaine d'action | -20/+10% of nominal voltage | ||
| Classe de puissance | 2 W + or - 10% | 3 VA + or - 10% | |
Contactos
| Número de contactos | 4 |
| Courant permanent maxi. admissible | 6 A per contact |
| Commutation faible recharge | 100 mW with min voltage 1 V ou I min 1 mA |
| Temps de réponse (rebonds non-inclus) | DC < 21 ms - AC < 21 ms |
Versions
. CS relay 60 Hz
. CS relay with other voltages
. CS relay with internal protection by Gemov or diode.
Homologations & conformities :
* CEI 255-1-00
* NFC 45-250 & 45-251
* HN 45S25-B2-CR HM63/8196 & CR HM63/8562 (resistance to seisms for relays 48 and 125 V)
. CS relay with other voltages
. CS relay with internal protection by Gemov or diode.
Homologations & conformities :
* CEI 255-1-00
* NFC 45-250 & 45-251
* HN 45S25-B2-CR HM63/8196 & CR HM63/8562 (resistance to seisms for relays 48 and 125 V)
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis
TEC Automatismes © 2024, Tous droits réservés