Imprimir
BA
Description
Instantaneous relay with high contact rating.
Relay pluggable on socket including a withdrawal clasp and two square guide pins which can ast as a key to ensure that the correct relay is used at the correct voltage.(see our withdrawal guide in the technical support pages of this site)
Recommended operating position : vertical coil axle/clapper upside or horizontal coil axle/contacts down.
Pluggable on front wiring socket (EVD) or rear wiring sockets (ER, ERB, ERDL).
Encombrement
Raccordement
Principe de fonctionnement
This relay is equipped with 5 double cut-off CO contacts with self arc blowing, particularly adapted to high DC cut-off.
Minimum switching current :
* up to 12 V : not recommended
* 160 mA at 24 V
* 55 mA at 48 V
* 8 mA at 125 V
* 0,9 mA at 220 V
* 0,1 mA at 380 V
Caractéristiques
Fonction |
Instantaneous |
Présentation |
under cover |
Raccordement |
on front or rear wiring socket |
Nombre de manoeuvres mécaniques |
50.000.000 |
Température de fonctionnement |
- 5??C to + 40??C |
Température de stockage |
- 40??C to + 70??C |
Catégorie climatique |
optional reinforced climatic protection |
Tension de choc |
5 KV (wave 1,2/50 ??s) |
Rigidité diélectrique |
2500 V eff |
Résistance d'isolement |
C500 (according to NFC 45-202 & VDE 0110) |
Masa |
300 g. |
Degré de protection |
IP 40 (according to NFC 20-010) |
Bobine
|
Courant continu |
Courant alternatif |
Tension nominale mini. |
6 V |
6 V |
Tension nominale maxi. |
220 V |
380 V - 50/60 Hz. |
Domaine d'action |
-20/+10% of nominal voltage |
Classe de puissance |
3 W +/- 10% |
14 VA +/- 20% |
7,5 VA +/- 20% |
Contactos
Número de contactos |
4 |
Courant permanent maxi. admissible |
10 A per contact |
Temps de réponse (rebonds non-inclus) |
DC < 36 ms - AC < 31 ms |
Pouvoir de coupure
COURANT CONTINU |
connection on DC |
|
|
Versions
BA72: DC versions
BA88: AC versions
Other versions:
. Relay BA with reinforced climatic protection
. Relay BA with specific characteristics upon request
. Relay BA UIC (for SNCF use)
. BA intensity relay (for DC)
Homologations & conformities :
* CEI 255-1-00
* NFC 45-250
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis