TEC AUTOMATISMES

Bienvenido Productos Electro-aimants et ventouses Latching hold magnet solenoids 7961

Electro-aimants et ventouses

Imprimir

7961

Masa : 6 g.

Alimentation : 6 to 24 VDC

Description

VOLTAGE CUT-OFF LATCHING HOLD MAGNET SOLENOID

CURRENT : DIRECT  -  OPERATION : HOLDING

Holding of a system in a determined position.

Detachment of the counter-plate obtained :

1. by cutting off the voltage supply
2. manually, by pulling a higher force than the holding force.

The return to the "hold" position is obtained by bringing back the counter-plate in the initial position. : DIRECT  -   : HOLDINGHolding of a system in a determined position.Detachment of the counter-plate obtained :1. by cutting off the voltage supply2. manually, by pulling a higher force than the holding force.The return to the "hold" position is obtained by bringing back the counter-plate in the initial position.

Plan d'encombrement / dimensions

• Courant continu

7961 - Front view   7961 - Back view
   

Données techniques

Force de maintien 0,7 daN
Puissance nominale à 20°C 1 W
Raccordement On wires length 100 mm

Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis

TEC Automatismes © 2024, Tous droits réservés