TEC AUTOMATISMES

Bienvenido Productos Electro-aimants et ventouses Latching hold magnet solenoids 7964

Electro-aimants et ventouses

Imprimir

7964

Masa : 200 g.

Alimentation : 6 to 220 VDC

Description

VOLTAGE CUT-OFF LATCHING HOLD MAGNET SOLENOID

CURRENT : DIECT  -  OPERATION : HOLDING

Holding of a system in a determined position.

Detachment of the counter-plate obtained :

1. by cutting off the voltage supply
2. manually, by pulling a higher force than the holding force.

The return to the "hold" position is obtained by bringing back the counter-plate in the initial position. : DIECT  -   : HOLDINGHolding of a system in a determined position.Detachment of the counter-plate obtained :1. by cutting off the voltage supply2. manually, by pulling a higher force than the holding force.The return to the "hold" position is obtained by bringing back the counter-plate in the initial position.

Plan d'encombrement / dimensions

• Courant continu

7964 - Front view   7964 - Back view
   

Données techniques

Force de maintien 40 daN
Puissance nominale à 20°C 5 W
Raccordement On wires length 150 mm

Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis

TEC Automatismes © 2024, Tous droits réservés