7961
Alimentation : 6 to 24 VDC
Description
VOLTAGE CUT-OFF LATCHING HOLD MAGNET SOLENOID
CURRENT : DIRECT - OPERATION : HOLDING
Holding of a system in a determined position.
Detachment of the counter-plate obtained :
1. by cutting off the voltage supply
2. manually, by pulling a higher force than the holding force.
The return to the "hold" position is obtained by bringing back the counter-plate in the initial position. : DIRECT - : HOLDINGHolding of a system in a determined position.Detachment of the counter-plate obtained :1. by cutting off the voltage supply2. manually, by pulling a higher force than the holding force.The return to the "hold" position is obtained by bringing back the counter-plate in the initial position.
Plan d'encombrement / dimensions
|
Données techniques
| Force de maintien | 0,7 daN |
| Puissance nominale à 20°C | 1 W |
| Raccordement | On wires length 100 mm |
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis