Electro-aimants et ventouses
79E1
Weight : 120 g.
Power supply : 6 to 48 VDC
Description
VOLTAGE APPLICATION SAFETY HOLD MAGNET SOLENOID
CURRENT : DIRECT - OPERATION : HOLDING
Holding of a system in a determined position and guaranteed in accordance with the NFS-61937 standard for security operated system.
Detachment obtained :
1. by applying voltage on the coil, the continuous magnet field will be broken,
2. manually, by pulling a higher force than the holding force..
The return to the "hold" position is obtained by bringing back the counter-plate in the initial position. : DIRECT - : HOLDINGHolding of a system in a determined position and guaranteed in accordance with the NFS-61937 standard for security operated system.Detachment obtained :1. by applying voltage on the coil, the continuous magnet field will be broken,2. manually, by pulling a higher force than the holding force..The return to the "hold" position is obtained by bringing back the counter-plate in the initial position.
Dimensions
|
Technical features
| Hold force | > or = 12 daN |
| Min. effort of detachment | 1,5 daN at 0,9 nominal voltage and 35°C |
| Standard voltages (Nom. Voltage ± 10%) (others voltages on demand) |
24 VDC - 48 VDC |
| Nominal power at 20°C | 3,5 W |
| Connection | On wires length 200 mm |
Non-contractual document - characteristics to be confirmed before order
TEC AUTOMATISMES reserves the right to modify description and specifications without notice