79E1
Alimentation : 6 to 48 VDC
Description
VOLTAGE APPLICATION SAFETY HOLD MAGNET SOLENOID
CURRENT : DIRECT - OPERATION : HOLDING
Holding of a system in a determined position and guaranteed in accordance with the NFS-61937 standard for security operated system.
Detachment obtained :
1. by applying voltage on the coil, the continuous magnet field will be broken,
2. manually, by pulling a higher force than the holding force..
The return to the "hold" position is obtained by bringing back the counter-plate in the initial position. : DIRECT - : HOLDINGHolding of a system in a determined position and guaranteed in accordance with the NFS-61937 standard for security operated system.Detachment obtained :1. by applying voltage on the coil, the continuous magnet field will be broken,2. manually, by pulling a higher force than the holding force..The return to the "hold" position is obtained by bringing back the counter-plate in the initial position.
Plan d'encombrement / dimensions
|
Données techniques
| Force de maintien | > or = 12 daN |
| Effort mini de décrochage | 1,5 daN at 0,9 nominal voltage and 35°C |
| Tensions standards (Un ± 10%) (autres tensions sur demande) |
24 VDC - 48 VDC |
| Puissance nominale à 20°C | 3,5 W |
| Raccordement | On wires length 200 mm |
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis