Relais instantanés et de Fonction
Imprimir
Adjustment is made by potentiometer on front face.
See the scheme hereafter
2381
Description
Voltage sensor relay for under voltage monitoring - 2 CO contacts - 10 A.
Pluggable on the following sockets : 9244, 9246, 9243 & 9946.
Detailed table of the coil resistance data is available in the technical support pages of this site or can be sent upon request.
Pluggable on the following sockets : 9244, 9246, 9243 & 9946.
Detailed table of the coil resistance data is available in the technical support pages of this site or can be sent upon request.
Encombrement
Raccordement
Principe de fonctionnement
2381 relay is an under voltage monitoring relay.Adjustment is made by potentiometer on front face.
See the scheme hereafter
Schéma de principe
Caractéristiques
| Fonction | under voltage monitoring |
| Présentation | under cover |
| Raccordement | on front or rear wiring socket |
| Nombre de manoeuvres mécaniques | 10.000.000 |
| Température de fonctionnement | - 25 to + 60°C |
| Température de stockage | - 40 to + 80°C |
| Catégorie climatique | Optional reinforced climatic protection |
| Tension de choc | 50 g - 11 ms |
| Rigidité diélectrique | 2,5 KV - 50 Hz - 1 mn |
| Résistance d'isolement | > 200 MOhms (500 VDC - new relay) |
| Masa | 130 g |
Bobine
| Courant continu | Courant alternatif | ||
| Tension nominale mini. | 24 V | 24 V | |
| Tension nominale maxi. | 220 V | 220/230 V | |
| Domaine d'action | 0,7 of nominal voltage to nominal voltage | ||
| Classe de puissance | relay : 2,2 W - electronics : 1 W | ||
Contactos
| Número de contactos | 2 |
| Courant permanent maxi. admissible | 10 A per contact |
| Commutation faible recharge | 150 mVA with min. voltage 5 V or I min 10 mA |
| Surcharge de court-circuit admissible | 250 A - 30 ms |
| Temps de réponse (rebonds non-inclus) | 0,5 s |
Pouvoir de coupure
| COURANT CONTINU | ||||||
|
||||||
| COURANT ALTERNATIF | ||||||
|
||||||
Versions
Reinforced climatic protection is proposed as an option.
For any complementary information regarding mounting and withdrawal, please refer to the technical support pages of this site or contact us.
For any complementary information regarding mounting and withdrawal, please refer to the technical support pages of this site or contact us.
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis
TEC Automatismes © 2024, Tous droits réservés