Electro-aimants et ventouses
7974
Weight : 250 g.
Power supply : 6 to 220 VDC
Description
VOLTAGE CUT-OFF LATCHING HOLD MAGNET SOLENOID
CURRENT : DIRECT - OPERATION : HOLDING
Holding of a system in a determined position.
Detachment of the counter-plate obtained :
1. by cutting off the voltage supply
2. manually, by pulling a higher force than the holding force.
The return to the "hold" position is obtained by bringing back the counter-plate in the initial position. : DIRECT - : HOLDINGHolding of a system in a determined position.Detachment of the counter-plate obtained :1. by cutting off the voltage supply2. manually, by pulling a higher force than the holding force.The return to the "hold" position is obtained by bringing back the counter-plate in the initial position.
Dimensions
|
Technical features
| Hold force | 70 daN |
| Nominal power at 20°C | 5,8 W |
| Connection | On wires length 100 mm |
Non-contractual document - characteristics to be confirmed before order
TEC AUTOMATISMES reserves the right to modify description and specifications without notice