Application

Surface treatment plant and pollutant waste management control box.

These two control boxes provide both the control for a surface treatment unit, and the control for a built-in polluting effluent treatment station.

Conception

3 steel cabinets and a console: one cabinet to manage the surface treatment (with associated console), two cabinets for the surface treatment pollutants (power and remote I/O)

• ST Cabinet: 1800 x 1600 x 400 mm
• Polluting effluent treatment station cabinet - power = 1400 x 800 x 400 mm
• Polluting effluent treatment station cabinet - remote I/O = 1200 x 800 x 300 mm
• Console: 1400 x 1000 x 400 mm

Composants

ELECTRIC SURFACE TREATMENT POLLUTANT STATION CABINETS

• 1 disconnecter switch
• 1 terminal block
• Motor starters + circuit breakers
• 400/24 VDC power supply + protection.
• Remote RightWON PLC + I/O
• with Ethernet connection
• Measurement instrument protection circuit breaker
• Transfer pump variable drive
• Level and disconnect relay control/command
• 1 230 V modular power outlet + protection
• 1 8 ports ethernet switch
• On the front face: 1 PC 15 inch touch panel + indicators, push buttons and switches
• 1 remote I/O control box

ST CABINET

• 1 disconnecter switch
• 1 terminal block
• Motor starters + circuit breakers
• 400/24 VDC power supply + protection
• Remote ethernet linked I/Os
• Measurement instrument
  protection circuit breaker
• Ventilator variable drive
• 14 starters for immersion
  heaters
• Disconnect relay control/command
• 1 230 V modular power outlet + protection
• On front face: indicators, push buttons and switches
• 1 console associated with a circuit breaker and 11 regulators