Imprimir
SSR2002
Description
Static relay permits, when it is connected to an AC circuit circuit, to ensure the periodic power supply of a load.
Its ability to accept overloads of about 10 In makes it particularly interesting for the switching of incandescent lamps.
Encombrement
Raccordement
Principe de fonctionnement
SSR 2002 is synchronised to the zero of the voltage at the closing of the circuit. Its flashing frequency is 1 Hz in standard.
Voltage range :
* 19 to 53 V AC Eff
* 90 to 240 V AC Eff
Min hold current :
* for U = 240 VAC Eff : 70 mA
* for U = 20 V AC Eff : 200 mA
Courant résiduel max : 3 mA (non excité)
Facteur de marche : 50%.
Example of applications :
* luminous alarm blocks
* control of warning lights for road traffic
* Warning lights on superstructures (water towers, cranes, aerials, civil engineering building sites, factories chimneys, ships masts, airports...)
* Services advertising
* luminous beacons.
(see following schematic)
Schéma de principe
Caractéristiques
Fonction |
Flashing |
Présentation |
Under case |
Température de stockage |
-40 to +85°C |
Masa |
100 g. |
Bobine
|
Courant continu |
Courant alternatif |
Tension nominale mini. |
|
19 V |
Tension nominale maxi. |
|
240 V |
Contactos
Surcharge de court-circuit admissible |
20 ms / 80 A max |
Pouvoir de coupure
COURANT ALTERNATIF |
commutation sur AC |
|
|
Versions
Other versions can be realized upon request :
* Specific frequencies (0,5 Hz, 2 Hz)
* Duty cycle 40%
* dual rythm flashing
* flashing with alternated outputs
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis