Relais instantanés et de Fonction
Imprimir
GAP
Description
Impulse relay - 4 CO contacts - 3 A.
Pluggable on socket with possible withdrawal clasp. Pins at the standard pitch of 2.54 mm. Possibility of polarizatio by mounting a male withdrawal clasp on the relay and a female withdrawal clasp on the socket.
GAP relay is pluggable on the following sockets : EVB/GE, 9877, EVC/GE, 9876, ER/GE 2.8, or ER/GE.
Pluggable on socket with possible withdrawal clasp. Pins at the standard pitch of 2.54 mm. Possibility of polarizatio by mounting a male withdrawal clasp on the relay and a female withdrawal clasp on the socket.
GAP relay is pluggable on the following sockets : EVB/GE, 9877, EVC/GE, 9876, ER/GE 2.8, or ER/GE.
Encombrement
Raccordement
Principe de fonctionnement
Functions :
* ET : impulse on voltage application
* MT : impulse on voltage lack
Duration of impulse contact : 0,15 to 1 s
Interval between 2 operations : > 1 s
* ET : impulse on voltage application
* MT : impulse on voltage lack
Duration of impulse contact : 0,15 to 1 s
Interval between 2 operations : > 1 s
Caractéristiques
| Fonction | impulse (ET - MT) |
| Présentation | under cover |
| Raccordement | on front or rear wiring socket |
| Nombre de manoeuvres mécaniques | 30.000.000 |
| Température de fonctionnement | - 5°C to + 40°C |
| Température de stockage | - 40°C to + 70°C |
| Catégorie climatique | optional reinforced climatic protection |
| Rigidité diélectrique | 2000 V eff-50 Hz |
| Résistance d'isolement | NFC 45-202 : C 250 V |
| Masa | 60 g. |
| Degré de protection | IP40 (according to NFC 20-010) |
| Tenue aux chocs mécaniques | severity 50 A (NFC 20-608) |
| Tenue aux vibrations | frequency range : 10-55 Hz (NFC20-616) |
Bobine
| Courant continu | Courant alternatif | ||
| Tension nominale mini. | 24 V | 24 V | |
| Tension nominale maxi. | 230 V | 230 V | |
| Domaine d'action | -20/+10% of nominal voltage | ||
| Classe de puissance | ET : 2 W - MT : 0,5 W | ||
Contactos
| Número de contactos | 4 |
| Courant permanent maxi. admissible | 3 A |
| Commutation faible recharge | 0,1 VA with min voltage 1 V and/or I min 1 mA |
| Temps de réponse (rebonds non-inclus) | < 14 ms |
Pouvoir de coupure
| COURANT CONTINU | ||||
|
||||
| COURANT ALTERNATIF | ||||
|
||||
Versions
. GAP relay with reinforced climatic protection
. GAP relay with specific voltages.
Homologations & conformities :
NFC 45-250
CEI 255.1.00
. GAP relay with specific voltages.
Homologations & conformities :
NFC 45-250
CEI 255.1.00
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis
TEC Automatismes © 2024, Tous droits réservés