Imprimir
CAK
Description
Flashing relay with fixed rythm - 2 CO contacts - 5 A.
Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide inthe technical support pages of this site).
Pluggable on the following sockets : EVB2/CA, ERC2/CA and ERDL2/CA.
Encombrement
Raccordement
Principe de fonctionnement
* rythm : fixed
* flashing frequency : 60 to 120 beats per minute at nominal voltage (possible decrease of the frequency by connecting an external capacitor between terminals +14 and -15).
This relay is specifically designed for the switching of incandescent lamps
CONTACTS RATING :
Voltage Lamp Contacts rating
125 V AC/DC 75 W-0,6 A 8 millions operations
" " 100 W-0,8 A 6 " "
" " 150 W-1,2 A 4 " "
220 " 75 W-0.34 A 8 " "
" " 200 W-0,9 A 2 " "
Caractéristiques
Fonction |
flashing |
Présentation |
under cover |
Raccordement |
on front or rear wiring socket |
Nombre de manoeuvres mécaniques |
35.000.000 |
Température de fonctionnement |
- 5°C to + 40°C |
Température de stockage |
- 40°C to + 70°C |
Catégorie climatique |
optional reinforced climatic protection |
Tension de choc |
5 KV (wave 1,2/50 µs) |
Rigidité diélectrique |
2200 V eff |
Résistance d'isolement |
NFC 45-202 : C500 - VDE0110 : C380 |
Masa |
200 g. |
Degré de protection |
IP 40 (according to NFC 20-010) |
Tenue aux chocs mécaniques |
severity 50 A (NFC 20-608 & CEI 68-2-27) |
Tenue aux vibrations |
0,35 mm / 10-55 Hz |
Bobine
|
Courant continu |
Courant alternatif |
Tension nominale mini. |
12 V |
12 V |
Tension nominale maxi. |
230 V |
380 V - 50/60 Hz |
Domaine d'action |
-20/+10% of nominal voltage |
Classe de puissance |
2,5 W (7 W as a peak) |
|
|
Contactos
Número de contactos |
2 |
Courant permanent maxi. admissible |
5 A per contact |
Commutation faible recharge |
40 W |
Versions
. CAK relay with reinforced climatic protection
. CAK relay with more rapid rythm
. CAK relay with high contacts rating.
Homologations & conformities :
* CEI 255-1-00
* NFC 45-250
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis