Relais instantanés et de Fonction
Imprimir
CAD
Description
Latching relay with magnetic hold.
Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide in the technical support pages of this site)
Pluggable on the following sockets : EVB2/CA, ERC2/CA, ERDL2/CA.
Pluggable on socket with a withdrawal clasp and square guide pins which can act as a key to ensure that the correct relay is used at the correct voltage (see our withdrawal guide in the technical support pages of this site)
Pluggable on the following sockets : EVB2/CA, ERC2/CA, ERDL2/CA.
Encombrement
Raccordement
Principe de fonctionnement
Caractéristiques
| Fonction | latching with magnetic hold |
| Présentation | under cover |
| Raccordement | on front or rear wiring socket |
| Nombre de manoeuvres mécaniques | 35.000.000 |
| Température de fonctionnement | - 5°C to + 40°C |
| Température de stockage | - 40°C to + 70°C |
| Catégorie climatique | optional reinforced climatic protection |
| Tension de choc | 5 KV (wave 1,2/50 µs) |
| Rigidité diélectrique | 2500 V eff |
| Résistance d'isolement | NFC 45-202 : C500 - VDE0110 : C380 |
| Masa | 200 g. |
| Degré de protection | IP 40 (according to NFC 20-010) |
Bobine
| Courant continu | Courant alternatif | ||
| Tension nominale mini. | 12 V | 12 V | |
| Tension nominale maxi. | 220 V | 230 V | |
| Domaine d'action | -20/+10% of nominal voltage | ||
| Classe de puissance | 10 VA +/- 20% | 5,5 VA +/- 20% | |
Contactos
| Número de contactos | 2 |
| Courant permanent maxi. admissible | 8 A per contact |
| Commutation faible recharge | 0,1 VA with min voltage 1 V and/or I min 1 mA |
| Temps de réponse (rebonds non-inclus) | DC < 9 ms - AC < 24 ms |
Pouvoir de coupure
| COURANT CONTINU | ||||||
|
||||||
| COURANT ALTERNATIF | ||||||
|
||||||
Versions
. CAD relay with reinforced climatic protection
. CAD relay with 3 CO contacts
. CAD relay with control by the -
Homologations & conformities :
* CEI 255-1-00
* NFC 45-350
. CAD relay with 3 CO contacts
. CAD relay with control by the -
Homologations & conformities :
* CEI 255-1-00
* NFC 45-350
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis
TEC Automatismes © 2024, Tous droits réservés