Relais instantanés et de Fonction
Imprimir
CACL97
Description
Electronic timer relay adjustable from 0.1 sec. to 10 h - 2 timed contacts / 2 instantaneous contacts- 3 A.
Pluggable on socket with a withdrawal clasp (see our withdrawal guide in the technical support pages of this site)
Pluggable on the following sockets : EVB2/CA, ERC2/CA, ERDL2/CA
Pluggable on socket with a withdrawal clasp (see our withdrawal guide in the technical support pages of this site)
Pluggable on the following sockets : EVB2/CA, ERC2/CA, ERDL2/CA
Encombrement
Raccordement
Principe de fonctionnement
Functions :
* ET - timed on voltage application : shunt or not terminals n° 3 and 13, timing is made on voltage application between 13 and 16 through a control contact.
* MT - timed on voltage lack : permanent voltage application between 13 and 16, relay energizing by closing the control contact between 3 and 13 (control by the -), timing on operate when opening the control contact.
Timing adjustable by potentiometer on front face:
* 0,1 s to 10 h
display accuracy : + 5% to + 20%
repetitiveness fidelity : +/- 0,1% or 10 ms
result of influences : +/- 5% or 30 ms
* ET - timed on voltage application : shunt or not terminals n° 3 and 13, timing is made on voltage application between 13 and 16 through a control contact.
* MT - timed on voltage lack : permanent voltage application between 13 and 16, relay energizing by closing the control contact between 3 and 13 (control by the -), timing on operate when opening the control contact.
Timing adjustable by potentiometer on front face:
* 0,1 s to 10 h
display accuracy : + 5% to + 20%
repetitiveness fidelity : +/- 0,1% or 10 ms
result of influences : +/- 5% or 30 ms
Caractéristiques
| Fonction | timer (ET, MT) |
| Présentation | under cover |
| Raccordement | on front or rear wiring socket |
| Nombre de manoeuvres mécaniques | 5.000.000 |
| Température de fonctionnement | - 10 to + 55°C |
| Température de stockage | - 25 to + 70°C |
| Catégorie climatique | optional reinforced climatic protection |
| Tension de choc | 5 KV (wave 1,2/50 µs) |
| Rigidité diélectrique | 1000 to 2200 V eff |
| Masa | 300 g. |
| Degré de protection | IP 20 (according to NFC 20-010) |
| Tenue aux chocs mécaniques | 50 g / 11 ms / semi-sinusoïde (CEI 68-2-27) |
| Tenue aux vibrations | 0,35 mm / 10-55 Hz / 10 cycles |
| Temps d'établissement | minimum supply time : DC 10 ms / AC 40 ms |
| Temps de coupure | recycling time : 30 ms |
Bobine
| Courant continu | Courant alternatif | ||
| Tension nominale mini. | 24 V | 24 V | |
| Tension nominale maxi. | 250 V | 250 V - 50/60 Hz | |
| Domaine d'action | -20/+10% of nominal voltage | ||
Contactos
| Número de contactos | 2 |
| Courant permanent maxi. admissible | 3 A per contact |
| Commutation faible recharge | 5 V - 10 mA |
Pouvoir de coupure
| COURANT CONTINU | ||||
|
||||
| COURANT ALTERNATIF | ||||
|
||||
Versions
Homologations & conformities :
* CEI 255-1-00
* NFC 45-250
* CEI 255-1-00
* NFC 45-250
Document non-contractuel - Caractéristiques à se faire confirmer avant commande
Tec automatismes se réserve le droit de modifier les descriptions et spécifications sans préavis
TEC Automatismes © 2024, Tous droits réservés